1991 to 1997 7, 8 and 9 speed Ergo levers had pointed hoods and a sweeping curved brake lever as in first picture below.* Upgrading to 10sp requires 10sp index gear (part #6) and 10sp ratchet ring (part #10), which are no longer available individually. Ergo levers should never be lubricated with WD-40, Tri-Flow, etc. On reassembly, only a small dab of light-duty grease on each g-spring is required- Whisper White or Campagnolo Professional Grease works well here.Sweat, corrosion and heavy use can cause faulty engagement of the index gear. Check thumb button (at rivet) for any excessive play.Sometimes, the parts may appear normal when first disassembled-clean dirt and grease off all parts and inspect carefully. Check closely for notching or wear on the inside of alloy spring carrierand bushing.♺ny time the lever is apart, it is a good idea to replace all springs, they are inexpensive and will restore your lever to like-new efficiency. Please allow 5 to 7 days for turn around time Please email if you would like an accurate estimate.Įnclose a letter with the problems you have encountered, the amount of mileage on your lever, your return address, e-mail and charge card information. The cost to rebuild or upgrade is $60.00 for labor/per lever, parts can range from $10. We can rebuild, upgrade, or retro-fit your 1999 to 2008, 9 or 10 speed Ergo Levers for you.The manual is for 1998 to 2008 Ergo levers. Campagnolo Ergopower manuals show how to rebuild a lever with detailed pictures and easy to follow, step by step instructions.We recommend replacing (at the minimum) G springs, Spring Carrier, when rebuilding a pre-2009 right side lever.Right or rear derailleur side, Ergo levers should be rebuilt every 10,000 to 15,000 miles, depending on maintenance and riding conditions.For levers 2009 and later, we can only replace the whole shifter mechanism as a " pro kit.".
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |